COMPANY

EVDOS SA is the largest company in irrigation equipment in Greece.

The successful result is an outcome based on the leadership, specialization and the guaranteed quality of its products.

The company equipped with the latest technology in design, using up  to  date systems CAD/CAM, in production, using special machines and equipped with specialized personnel, has the ability to cover the continuing increasing needs of the local and international market.

Products:

HYDRANTS

1) Dimensions

2) Hydrants Types

Air relief valves

1) AIR INLET CHECK VALUE

BODY : DUCTILE IRON GGG 40 - STEEL ST 37
FLANGES : DIN 2501
WORK PRESSURE : 10 - 16 Bar
COATING : POWDER EPOXY 200 μ

2) AIR RELIEF VALVE TYPE 200 SINGLE ACTION

Air relief valves single action evacuate the air during the filling or the emptying of the pipe and facilitate the flow of the water.

Flanges : DIN-ISO-ANSI-BS 4505 Dimensions : DN 50
Pressure max. : PN 10 - 16 - 25 Pressure min. : 0,2 Bar

AIR RELIEF VALVE KINETIC TYPE DOUBLE ACTION

TYPE : 400 - 600 - 900 - 1200

Air relief valves double action evacuate the air during the filling or the emptying of the pipe
and suppress obstacles created by air when the pipeline work under pressure and facilitate
the flow of the water.

Flanges : DIN-ISO-ANSI-BS 4505
Dimensions : DN 50 - 300
Pressure max. : PN 10 - 16 - 25 - 40 - 64 - 100
Pressure min. : 0,1 BarCoating : Powder epoxy 250 microns.

MATERIAL LIST DIMENSIONS
TYPE 400-600-900

MATERIAL LIST DIMENTIONS
TYPE 1200

FLOW CAPACITY

SEWAGE AIR RELIEF VALVE

BODY : DUCTILE IRON GGG 40 or STEEL ST 37
FLANGES : DIN 2501
WORK PRESSURE : 10 - 16 Bar
COATING : POWDER EPOXY 200 μm

Hydraulic control valves

BASIC VALVE - DIMENTIONS
PRESSURE SUSTAINING VALVE

ELECTRIC PRESSURE SUSTAINING VALVE

MANUAL VALVE ON-OFF

ELECTRIC VALVE ON-OFF

PRESSURE SUSTAINING & PRESSURE
REDUSING VALVE

CHECK VALVE
FLOAT CONTROL VALVE

QUICK RELIEF VALVE

SEWAGE QUICK RELIEF VALVE

PRESSURE REDUSING VALVE

PILOTS

CHECK VALVE MEMBRANE TYPE

FLANGE :DIN 2501
FACE TO FACE :DIN 3202
DIMENSTIONS : DN 50 - DN 300
PRESSURE : ΡΝ 10 - ΡΝ 16 - PN 25
TEMPERATURE : 70 C
COATING : POWER EPOXY 200 μm

Check valve membrane type secures tightness for big working duration , closes quietly and avoids water hammer.

Valve closes easily by a membrane with special form and composition.

DIMENSIONS - FLOW CAPACITY

DISMANTLING JOINT

BODY : DUCTILE IRON GGG 40 - STEEL ST 37
RUBBER : NBR
FLANGES : DIN 2501
BOLTS - NUTS : STELL
WORK PRESSURE : 10 - 16 - 25 - 40 - 64 - 100 Bar
COATING : POWDER EPOXY 250 μm

DIMENSIONS

Quick relief valves

QUICK RELIEF VALVE AB-S TYPE

Dimensions : DN 50 - 80 - 125 - 200
langes : DIN-ISO-ANSI-BS 4505
Coating : Power epoxy 200 microns

MATERIAL - DIMENSION

QUICK RELIEF VALVE QR-S TYPE

Dimensions : DN 50 - 200

Working pressure : PN 10 -16 - 25 - 40

Flange drilling : DIN - ISO PN 10-16-25-40

Coating : Powder epoxy 250 μm

The pressure relief valve is constructed in order to protect main pipe lines from water hammer .
The basic design consist of a fixed nozzle , a disc and a preloaded spring.Each valve is regulated and tested in a specially test bench in the factory , under pressure which is settled by the customer.The valve is regulated at the place where is installed , 5% - 10% more than the work pressure.

MATERIAL LIST - DIMENSIONS - FLOW CAPACIT

GATE RUBBERIZED VALVE

Dimensions DN 50 - 600
Flange : DIN - ANSI - BS
Coating : Power epoxy 300 μm

DIMENSIONS

MATERIAL LIST

Watermeter

1)  WATER METER PROPORTIONAL TYPE

DIMENSIONS : 2'' - 2 1/2'' - DN 50 - 65 - 80 - 100

2) WATER METER WM-E

DIMENSIONS : DN 50 - 300

Flow limiter

1) FLOW LIMITER WAFER TYPE

TYPE F for pressure till 5 Bar
TYPE FH (with hooks) for pressure 10 Bar
Flow's error 0 till +20 %.

2) FLOW LIMITER FLANGED TYPE

Flow limiter reduces the flow rate regardless of flow and pressure fluctuations.
Rubber and seat secure a progressively distortion so as to change the flow rate in
compliance with network'' s dynamic pressure.TYPE FF Flanged for pressure till 5 Bar
TYPE FHF Flanged (with hooks) for pressure 10 Bar
Flow's error 0 till + 20 %

Body : Steel - Brass - Cast iron
Rubber : NBR
Hooks : Stainless Steel.
MATERIAL LIST DIMENSIONS

EXPORTS

EVDOS SA activities cover a big part of Greek market and its sales increase furiously all over the world. Its sales network increase continuously and makes stronger its presentation in Greek and International market.

The export processes are realised immediately or through representatives achieving the direct and essential support of customers. The extension of our network is found in the direct drawings of company and the creation of new collaborators constitute fundamental objective of company.

EYDOS exports in the following countries: France, Spain, Portugal, Tunisia, Morocco, Italy, Cyprus.

PATENTS

The search of pioneering technical solutions ledus to the creation of a designing department, for the study of original and functional products, in our try to achieve the biggest output as well as their essential functionalism.

After the byway of time, this effort has attributed her fruits, with the creation and certification of patents products of our company.

The maintenance of high level of the quality of our company's products, imposes us to continue this effort.

QUALITY

EVDOS SA priority is to constitute and maintain high quality standards for all the products and services provided in a such a way that customers expectations and special needs are always fulfilled.

With the effective application of certified Quality Assurance System according to ISO 9001 is achieved effectively best quality in Supplies, Production,  Testing, Delivery, Service.

The certificate according to ISO 9001 is a confirmation for company's interest in TOTAL QUALITY.