Many things have been changed since then: our plant, our equipment,
our products, our organization. The only thing remained unchanged is
our commitment to quality.

By watching closely the evolution of technology and also the needs of
our customers, we continuously improve our products and services in
order to offer flexible solutions, that contribute to the implementation of
technology to everyday life.

Hundreds of millions meters of cables have been produced at our
manufacturing plant in Pentalofos –Thessaloniki- Greece, and have
been distributed to every domestic and many international destinations

PRODUCTS & SERVICES

Vector Coaxial Cables

This multi-coaxial cable consists of 4 individual cables of type VECTOR SAT 110, under a common outer sheath. Each one of the 4 cables has a colored stripe for easy identification. It is used in structured satellite cabling installation with multiswitches

Vector Coaxial Cables

It has the same electrical characteristics with Vector Dgs 1600 and moreover its outer sheath is made of a Polyethylene compound. This compound complies with IEC 708, DIN VDE 0207 Part 3, Type 2YM1 and 2YM2, ASTM D 1248: Type I, Class C,Category 5, CENELEC HD 626.4 S1 LD/MD . It has high resistance to moisture, heat, UV-rays, abrasion, stress cracking and oxidation. Vector Dgs 1602 is recommended for outdoors or underground installation.

Vector Coaxial Cables

It has the same electrical characteristics with Vector Dgs 1600 and moreover its outer sheath is made of a Polyethylene compound. This compound complies with IEC 708, DIN VDE 0207 Part 3, Type 2YM1 and 2YM2, ASTM D 1248: Type I, Class C,Category 5, CENELEC HD 626.4 S1 LD/MD . It has high resistance to moisture, heat, UV-rays, abrasion, stress cracking and oxidation. Vector Dgs 1602 is recommended for outdoors or underground installation.

Vector Coaxial Cables

It has the same electrical characteristics with Vector Dgs 1600 and moreover there is a colored stripe along the outer sheath. In every carton packing (500m) there are 5 plastic reels of 100m : One with a red stripe, one with a yellow stripe, one with a green stripe, one with a gray stripe and one with a blue stripe. It helps identification of individual cables at complex networks. It is recommended for structured cabling with multiswitches.

Vector Coaxial Cables

It has the same electrical characteristics with Vector Dgs 1600 and moreover its outer sheath is made of a Halogen Free Flame Retardant compound. This compound complies with CEI 20-11 Type M1, VDE 0207 Part24 type HM2, VDE 0250 Part 215 Type HM5, HD 21-14 S1 Type TI6. In case of a fire it does not propagate the flame ( Oxygen Index 36% according to ISO 4589) and the evolving gases are not toxic (Halogen acid gas evolution 0,1% according to IEC 60754-1). It is recommended for indoor installation at crowded places like schools, hotels, theaters, hospitals, cinemas, airports.

Vector Coaxial Cables

It has a copper inner conductor 1,20mm and a very dense copper braid. Its Cu-Pet tape is bonded to the insulation, protecting it from moisture ingress and contamination. It has the lowest attenuation values of all the cables of the Vector Dgs series, 27,50dB@2150MHz

Vector Coaxial Cables

It has the same electrical characteristics with Vector Dgs 2000 and moreover its outer sheath is made of a Polyethylene compound. This compound complies with the following specifications IEC 708, DIN VDE 0207 Part 3, Type 2YM1 and 2YM2, ASTM D 1248: Type I, Class C,Category 5, CENELEC HD 626.4 S1 LD/MD . It has high resistance to moisture, heat, UV-rays, abrasion, stress cracking and oxidation. Vector Dgs 2002 is recommended for outdoors or underground installation

Vector Coaxial Cables

It has an inner conductor of silver coated copper 1,13mm. Its outer conductor consists of three elements : One Al-Pet-Al tape bonded to the insulation, one dense braid made of silver coated copper wires and an additional Al-Pet-Al tape under the sheath. Vector Dgs 3600 has the best shielding efficiency of all the cables of the Vector Dgs series.

Coaxial Cables

Compared to the RG 59 type, it has a more dense braid and also an outer sheath made from PE compound. It has high resistance to moisture, heat, UV-rays, abrasion, stress cracking and oxidation. It is recommended for outdoors or underground

Vector Coaxial Cables

It has a 1,10mm copper inner conductor and an outer conductor that consists of a copper – polyester tape under a copper braid

Vector Coaxial Cables

It has a 0,80mm diameter copper inner conductor and outer diameter 5,60mm. Because of its small dimensions, it can be used whenever there is a need extra cable through existing conduits with limited available free space

Vector Coaxial Cables

A VECTOR SAT 110 type with an additional conductor of 0,75 mm2 cross-section. It is used when together with the TV signal there is a need to transfer also a control signal.

Microphone Cables

2 conductors X 0,22mm2
Each conductor LF PVC insulated, color coded
Tinned copper spiral shield
Outer sheath of LF PVC, color black, outer diameter 4,80mm

Microphone Cables

2 conductors X 0,50mm2
Each conductor LF PVC insulated, color coded
Tinned copper spiral shield
Outer sheath of LF PVC, color black, outer diameter 5,50mm

Alarm Systems Cables

4 conductors X 0,22 mm2
2 conductors X 0,50 mm2
Each conductor LF PVC insulated, color coded
One drain wire
Al-Pet tape shielding
Outer sheath of LF PVC, color white, outer diameter 6,00mm